Untitled

ISLANDS and AREAS of LIGHT – Infrastructure Development

Electricity – The 235V/10kHz and 36V/50kHz power distribution, – a later option for our Areas of Light

On left: – the proposed 440V, 20KHz HFAC power distribution – https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19860018650.pdf

On mid and on right: – the proposed HFAC 235V/10kHz and 36V/50kHz power distribution

Discussion to continue...

Related post:
https://lightcommunitylighting.blogspot.com/2019/04/untitled_23.html

---

Reference material:

Ideas for Future Electric Aircraft System
Asian Power Electronics Journal, Vol. 9, No. 2, Dec. 2015, p.48-51;
S. Raghu Raman, K. W. Eric Cheng, N.C. Cheung;

Power Electronics Research Centre, Department of Electrical Engineering, The Hong Kong Polytechnic University, Hong Kong

http://perc.polyu.edu.hk/APEJ/vol.9%20no.2/Vol.9%20No.2.pdf

---

UNTITLED

OPEN SOURCE EVERYTHING


The 'Laser Diode Bulb' of 407nm – a possible high efficiency violet light source for esoteric use.

On left: A 'filament LED' BT-shaped bulb illustrating the uncoated (no phosphor) array of laser diodes in a linear form;

On right: A coated (with phosphor) BT-shaped bulb illustrating the finished 'laser diode bulb'

On left: A 'filament LED' ED-shaped bulb illustrating the uncoated (no phosphor) array of laser diodes in a helicoidal form;

On right: A coated (with phosphor) ED-shaped bulb illustrating the finished 'laser diode bulb'

Filament componence details

[Images are only for illustration and educative purposes]

Notice: 
The case of the coated lamp (image on right, above) has to be considered of 'remote phosphor' type, from a LED point of view. 
As shown in the lower image, the coatings (outer layer) of the filament (laser diodes array) are with no phosphor, but diffusing only. 
The phosphor coating is on the inner side of outer bulb, similar to the coated HID lamps, in order to work in this way. 
In this case a large area of phosphor coating can be achieved, and, it is at a certain distance from the heat source (filament) preventing the overheating of the phosphorous.


Research needs to be conducted...



Related links:

SPECTRA OF VIOLET LASERS  http://www.ledmuseum.net/vlspec.htm

General Thermal Management Advice for Laser Diodes
 https://blog.rpmclasers.com/general-thermal-management-advice-for-laser-diodes

LD specially suited for remote phosphor configurations
https://www.swissphotonics.net/libraries.files/Rossetti.pdf


Related posts: https://lightcommunitylighting.blogspot.com/2019/12/blog-post.html

---

Cobra's up to date post: http://2012portal.blogspot.com/2020/01/age-of-aquarius-activation-preliminary.html

---

The Hybrid Incandescent/Neon-discharge Lamp

OPEN SOURCE EVERYTHING


The Hybrid Incandescent/Neon-discharge Lamp – an interesting attempt to achieve a red-orange light source for esoterics, Light Communities, Areas of Light and Contact Zones

Depiction of a possible appearance of the

 Hybrid Incandescent/Neon-discharge Lamp

Related posts:

Halogen Hybrid Incandescent/Discharge Lamp
https://lightcommunitylighting.blogspot.com/2018/01/blog-post_31.html


The 'Hybrid Incandescent/Discharge Lamp' as an Antenna for Scalar Waves
https://lightcommunitylighting.blogspot.com/2018/11/blog-post_29.html

The 'hybrid incandescent/xenon-discharge lamp' 
https://lightcommunitylighting.blogspot.com/2018/04/blog-post.html




Related patents:

High pressure discharge lamp with incandescent filament for starting 
https://patents.google.com/patent/US4939417
https://patentimages.storage.googleapis.com/5b/a6/64/1b9332d8eb8cbd/US4939417.pdf

High pressure neon arc lamp
https://patents.google.com/patent/US6593706
https://patentimages.storage.googleapis.com/79/d1/03/9746c6bbf22ea1/US6593706.pdf

HID arc-tube with constriction of the high pressure discharge

[Image for only illustration and educative purposes]

---

Untitled

OPEN SOURCE EVERYTHING


The 'filament laser diode bulb', as a new kind of possible lighting source for our Areas of Light and Contact Zones.

Image of 'filament LED' bulbs 

(for illustration and educational purpose only)

To be more clear, there is not the intent to achieve a laser like device or to project a laser beam.
The goal is to achieve a light source, a lamp (a so much 'hated' bulb), using the advantages of the laser diodes.
Its light will be, if not diffuse, at least not so beamed.
https://physics.stackexchange.com/questions/413715/diffusing-a-laser

If you are at least in an average knowledge, then think at the 'laser diode' and at the 'filament led bulb'.
Does any idea come to you?...

https://www.archlighting.com/technology/lessons-on-laser-diodes_o

https://www.explainthatstuff.com/semiconductorlaserdiodes.html

https://www.led-professional.com/resources-1/articles/laser-technology-for-lighting-applications-a-review-and-analysis-of-a-promising-technology

https://www.elprocus.com/laser-diode-construction-working-applications/

https://www.researchgate.net/publication/334623528_Packaging_for_Laser-based_White_Lighting_Status_and_Perspectives

https://www.researchgate.net/publication/5313878_A_distributed_feedback_silicon_evanescent_laser

https://www.researchgate.net/publication/3288953_High-power_antiguided_laser_array_fabricated_without_the_need_for_overgrowth


Research needed to be conducted...

Illustration of the supposed <laser diode filament> layers

Discussion to continue...

---

Cobra's up to date post: http://2012portal.blogspot.com/2019/12/make-this-viral-age-of-aquarius.html

---

The High Pressure Neon Arc Lamp

OPEN SOURCE EVERYTHING


The High-Pressure Neon Lamp as another attempt to achieve a red light source for esoterics, Light Communities, Areas of Light and Contact Zones

Depiction of a possible appearance of  

the Neon HID lamp

NOTICE!
Discussion about the 'high pressure neon arc lamp' (Ne) do not include the proposed 'medium pressure neon-mercury discharge lamp', which is a case itself.
This one will use for research the 'common' phosphorous coating for HID mercury lamps. It's main light spectrum is expected to come out from the discharge itself, and will be a reddish based spectrum. Let's say from light-cyclamen to violet-red, depending of the balance between neon and mercury (in discharge terms, not in 'weights').

Neon, as a light gas of high thermal conductivity, leading to much heat being lost from the electrodes, is expected to have a less efficient discharge in this way. So, an as high as technically possible pressure discharge must be achieved in order to provide a high constriction of the arc discharge.



Related posts:

https://lightcommunitylighting.blogspot.com/2018/05/the-medium-pressure-neon-mercury.html

https://lightcommunitylighting.blogspot.com/2018/01/hot-cathode-neon-discharge-lamps.html

---

Related links:

A high pressure neon arc lamp and method of using the same for photodynamic therapies:
http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL&p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=6593706.PN.&OS=PN/6593706&RS=PN/6593706

https://pdfpiw.uspto.gov/.piw?PageNum=0&docid=06593706&IDKey=4813F1FF4868%0D%0A&HomeUrl=http%3A%2F%2Fpatft.uspto.gov%2Fnetacgi%2Fnph-Parser%3FSect1%3DPTO1%2526Sect2%3DHITOFF%2526d%3DPALL%2526p%3D1%2526u%3D%25252Fnetahtml%25252FPTO%25252Fsrchnum.htm%2526r%3D1%2526f%3DG%2526l%3D50%2526s1%3D6593706.PN.%2526OS%3DPN%2F6593706%2526RS%3DPN%2F6593706

 98.5% Ne, 1.5% Ar

http://www.lamptech.co.uk/Spec%20Sheets/D%20SHP%20Sylvania%20ULX360.htm

http://www.lamptech.co.uk/Spec%20Sheets/D%20IN%20Philips%20408E.htm

---

Cobra's up to date post:  http://2012portal.blogspot.com/2019/12/blue-dawn-ascension-conference-report.html

---