ISLANDS and AREAS of LIGHT - Infrastructure Development
Electricity - DC (direct current) Appliances
Pieces of blue prints of 'electric lighting construction sets' are available, as some miniature pendant or bracket-arm positioned open (unclosed bulb) lighting units.
Miniature Outdoor Pendant/Bracket-Arm Radial Waves Lighting Fixtures 125/4.83"
- Recommended mounting height: 2.70...3.30m/9...11ft.
- Voltage: 12V; 24V DC (ripple-free).
- Only insulated lampholders required.
1 - CUP
2 - BELL
3 - SAUCER/DISH
4 - LAMPSHADE
5 - SMALL PIECES and DETAILS
> Shell - Side Bracket-Arm Fixing:
> Flange - Side Bracket-Arm Fixing:
> Flange - Overhead Wire/Rod Fixing:
In case of use of automotive bulbs, only insulated lampholders should be used.
Insulated BA9s and BA15s lampholders dimensional details will be available on this blog:
What we refer here as 'Low voltage lighting units', the term 'Low voltage' must be considered as described here:
NOT the case should be this, in any way!
Related link: http://www.encyclopedia-magnetica.com/doku.php/extra-low_voltage
Suitable LEDs - Useful Links:
Suitable lampholders - Useful Links:
Lampholders E10, E14: https://www.etg-groep.nl/artikel/496650/80-lamphouder-e10.html
E10 and E14 lampholders are recommended here for only 12 to 24V DC lamps!
It's forbidden (strictly not allowed) to use higher voltage for the units presented in this page!