STAR COLORS http://www.southastrodel.com/Page029bAmerican.htm
... 'saturated colors',... 'frequency colors,... 'sound colors',...'energy colors';... which ones are ours we speak about?...
What is (or might rather be) for instance 'the Violet Flame'?...
a saturated violet, or rather a 'f2' spectrum of energy behind it??...
(as previous in discussion...)
...the 'saturated colors bulbs' on the market might be not saturated at all...
The color which gives a bulb to you may be not the same 'saturated' which your computer screen gives out...
WARNING!
Do NOT use 'unprotected metal halide lamps' in your home, none in 'open rated' lighting fixtures!...
ATTENTION!
What we discuss here about lighting is not a DIY (do yourself) home improvements idea...
What we name by knocking together nowadays tech is in the sense of putting together, but in a responsible manner, what is nowadays accessible technicaly, thus reach it or not our scope exactly...
Proposal of experiments are in discussion for only advised specialists or researchers, not for 'the average person'!! Keep this in mind...
Nor do we advise to lit HID lamps in your home or garage as in videos linked on subjects.
As our concern, we never light on a HID lamp on the research desk without a protective cage.
What you see in many videos is highly not recommended for an unadvised person.
Spectrum Tubes
Individually available for many optical applications; may be used for extending frequency spectrum of Lakhovsky machines:
https://www.amazing1.com/pages/health/body-energy-charging-machines.html
"The pure elements / gases under pressure in these tubes is generally used to produce a light for spectral analysis. Brightness of the light discharge depends on the power of electrical energy being supplied to the tube. The nature of gas determines the pure spectral color and usually is of a relatively low band width. All lamps contain metal ends with long-life electrodes. Lamps are about 26 cm (10 inches) long, with 90-100 mm of central capillary. Lamps are intended for intermittent use only at full power, and not for use as a lamp source. These are designed to operate 30 seconds ON / 30 seconds OFF. (They may be operated continuously when used with the LAKHOVSKY machine, as shown in the instructions for that device.) Requires a Spectrum Tube Power Supply (such as our low-cost NEON21 for do-it-yourselfers, or the finished 2154-1, both below) or our Induction Coil 1917-10 to operate, sold separately."
P.S. Not recommended to DIY, but only if you are at least an average specialist or researcher...
Cobra's up to date post:
http://2012portal.blogspot.com/2018/03/short-situation-update_2.html
No comments:
Post a Comment